Spray glue is a clean, fast and easy way of gluing. It connects simple materials to each other and to each other. The gluing speed depends on the glued materials. Porous materials bond together immediately after applying the adhesive. When gluing non-porous materials, a ventilation time of approx. 1-15 minutes is required and depends on the condition of the surface and the ambient temperature. The joining of the parts can only take place if the thread is pulled out after touching it with your finger. The spray dispenser is equipped with an adjustable dosing valve for the output of large, medium or small amounts of glue. In addition, this valve is also adjustable according to the type of use, to the horizontal - wide and to the vertical - narrow glue outlet. Temperature resistance from -20 ° C to + 65 ° C.
Used for gluing:
paper, cardboard
wood and thin plywood
leather, cork and textiles
light foams (eg Foam)
rigid foams (eg polystyrene)
rubber
plastic foils (except PVC and polyethylene)
Instructions for use:
Shake well before use, spray on the glued surface from a distance of about 15-30 cm. The surface must be dry, clean and degreased. After failure, join the parts together by pressure.
